PRODUCTION OF Fe3Al INTERMETALLIDE BY POROUS METALLURGY METHODS
DOI: https://doi.org/10.26909/csl.4.2016.3
Abstract
In this paper we were investigated the possible ways of obtaining intermetallic Fe3Al for different methods of powder metallurgy. It is shown that the impact sintering of powder mixtures Fe + 14Al, Fe + 15Al at temperatures of 1050 and 1150 ° C allows to obtain non-porous samples, while the free sintering at temperatures of 1400 and 1450 ° C results in a sample with a porosity of 15 and 6% respectively. It is found that the use of impact sintering and hot forging allows to obtain a solid intermetallic Fe3Al with higher mechanical properties compared to the free sintering. It is shown that a change of the structure leads to a change the mechanical properties.
References
1. Peng L.M. High strength and high fracture toughness ceramic−iron aluminide (Fe3Al) composites / L.M .Peng, H. Li, J.H. Wang, M. Gong // Materials Letters. – 2006. –Vol. 60. – P. 883– 887.
2. Liu C. T. Recent advances in B2 iron aluminide alloys: deformation, fracture and alloy design /. C. T. Liu, E. P. George, P. J. Maziasz, J. H. Schneibel // Materials Science and Engineering A. – 1998. – No. 1–2, Vol. 258. – Р. 84-98.
3. Deevi S. C. Nickel and iron aluminides: An overview on properties, processing, and applications / S. C. Deevi, V. K. Sikka // Intermetallics. – 1996. – Vol. 4, No. 5. – P. 357-375.
4. Huang Y. D. Effect of thermomechanical processes on room-temperature mechanical properties of Fe3Al-based alloys / Y. D. Huang, W. Y. Yang, Z. Q. Sun // Journal of Materials Science Letters. – 1998. – Vol. 17. – No.1. – P. 1781 – 1784.
5. Godlewska E. FeAl materials from intermetallic powders / E. Godlewska, S. Szczepanik, Mania, J. Krawiarz, S. Kozinski // Intermetallics. – 2003. – No. 4, vol. 11. – P.307-312.
6. Zhang Z.-R. Mechanical properties of Fe 3 Al-based alloys with addition of carbon, niobium and titanium / Z. R. Zhang, W. X. Liu // Materials Science and Engineering A 2006. – Vol. 423. – P 343–349.
7. Szczepanik S. Influence of hot forming on the properties of Fe-Al intermetallic materials / Szczepanik, E. Godlewska, R. Mania // Proc. of the 8th Inter. Conf. on Metal Forming. – Rotterdam, 2000. – P.477–484.
8. He Q. Influence of iron powder particle size on the microstructure and properties of Fe3Al intermetallics prepared by mechanical alloying and spark plasma sintering / Q. He, C. Jia, J. Meng // Materials Science and Engineering: A. – 2006. – No. 1-2. – Vol. 428. – P.314 – 318.
9. Wang J. Effect of fabrication methods on microstructure and mechanical properties of Fe3Al-based alloys/ J. Wang, J. Xing, Z. Qiu, X. Zhi, L. Cao // Journal of Alloys and Compounds. – 2009. – Vol.488. – P. 117–122.
10. Kang H.Z. Swelling behavior in reactive sintering of Fe–Al mixtures / H.Z. Kang, C.T. Hu // Materials Chemistry and Physics. – 2004. – Vol 88. – P.264–272.
11. Gedevanishvili S. Processing of iron aluminides by pressureless sintering through Fe+Al elemental route / S. Gedevanishvili, S.C. Deevi // Materials Science and Engineering: A. – 2002. – Vol. 325. – P.163 – 176.
12. Salamon M. Interdiffusion, Kirkendall effect, and Al self-diffusion in iron–aluminium alloys / M. Salamon, H. Mehrer // Zeitschrift für Metallkunde. – 2005. – Bd. 96. – N. 1. – P.4-16.
13. Laptiev A. Microstructure and mechanical properties of WC-40Co composite obtained by impact sintering in solid state / A. Laptiev, Z. Pakiela, O. Tolochyn, T. Brynk // Journal of Alloys and Compounds. – 2016. – Vol. 687. – P.135 – 142.
14. Laptev A.V. Structure and Properties of Ni3Al Intermetallic Under Vacuum Impact Sintering / A. V. Laptev, A. I. Tolochin, M. S. Kovalchenko, Ya. I. Evich, I. Yu. Okun // Powder Metallurgy and Metal Ceramics. – 2016. – Vol. 54. – P.554 – 567
15. Баглюк Г.А. Вплив технологічних режимів гарячого штампування на структуру та властивості порошкових інтерметалідів Fe3Al / Г. А. Баглюк, О. І. Толочин, О. В. Толочина, Р. В Яковенко // Вісник національного технічного університету «ХПІ». Серія: Інноваційні технології та обладнання обробки матеріалів у машинобудуванні та металургії. – 2014. – № 44 (1087). – С. 8-15.
16. Baglyuk G.A. Effect of Process Conditions on the Structure and Properties of the Hot- Forged Fe3Al Intermetallic Alloy / G. A. Baglyuk, A. I. Tolochin, A. V. Tolochina, R. V. Yakovenko, A. N. Gripachevckii, M. E. Golovkova // Powder Metallurgy and Metal Ceramics. – 2016. – Vol. 55. – P.297 – 305.
17. Баглюк Г.А. Влияние диборида титана на структуру и свойства горячештампованного интерметаллида Fe3Al / Г.А. Баглюк, А.В. Толочина, А.И. Толочин, Р.В. Яковенко, В.К. Кудь, М.Е. Головкова, Я.И. Евич, А.Н. Грипачевский // Міжвузівський збірник «Наукові нотатки», Луцьк. – 2015. – Випуск №50. – С. 8-17.
18. Jia C. Fe3Al based alloys fabricated by spark plasma sintering from mechanically activated powders / C. Jia, Q. He, J. Meng // Materials Science Forum – 2007. – Vols. 539–543. – P. 2706–2712.
19. Torun O. Friction welding of cast Fe-28Al alloy / O. Torun, I. Celikyürek, B. Baksan // Intermetallics.– 2011. – Vol. 19. – P. 1076–1079.
20. Subramanian R. Iron aluminide–Al2O3 composites by in situ displacement reactions: processing and mechanical properties / R. Subramanian, C.G. McKamey, J.H. Schneibel, L.R. Buck, P.A. Menchhofer // Materials Science and Engineering A. – 1998. – Vol. 254. – P. 119- 128.
2. Liu C. T. Recent advances in B2 iron aluminide alloys: deformation, fracture and alloy design /. C. T. Liu, E. P. George, P. J. Maziasz, J. H. Schneibel // Materials Science and Engineering A. – 1998. – No. 1–2, Vol. 258. – Р. 84-98.
3. Deevi S. C. Nickel and iron aluminides: An overview on properties, processing, and applications / S. C. Deevi, V. K. Sikka // Intermetallics. – 1996. – Vol. 4, No. 5. – P. 357-375.
4. Huang Y. D. Effect of thermomechanical processes on room-temperature mechanical properties of Fe3Al-based alloys / Y. D. Huang, W. Y. Yang, Z. Q. Sun // Journal of Materials Science Letters. – 1998. – Vol. 17. – No.1. – P. 1781 – 1784.
5. Godlewska E. FeAl materials from intermetallic powders / E. Godlewska, S. Szczepanik, Mania, J. Krawiarz, S. Kozinski // Intermetallics. – 2003. – No. 4, vol. 11. – P.307-312.
6. Zhang Z.-R. Mechanical properties of Fe 3 Al-based alloys with addition of carbon, niobium and titanium / Z. R. Zhang, W. X. Liu // Materials Science and Engineering A 2006. – Vol. 423. – P 343–349.
7. Szczepanik S. Influence of hot forming on the properties of Fe-Al intermetallic materials / Szczepanik, E. Godlewska, R. Mania // Proc. of the 8th Inter. Conf. on Metal Forming. – Rotterdam, 2000. – P.477–484.
8. He Q. Influence of iron powder particle size on the microstructure and properties of Fe3Al intermetallics prepared by mechanical alloying and spark plasma sintering / Q. He, C. Jia, J. Meng // Materials Science and Engineering: A. – 2006. – No. 1-2. – Vol. 428. – P.314 – 318.
9. Wang J. Effect of fabrication methods on microstructure and mechanical properties of Fe3Al-based alloys/ J. Wang, J. Xing, Z. Qiu, X. Zhi, L. Cao // Journal of Alloys and Compounds. – 2009. – Vol.488. – P. 117–122.
10. Kang H.Z. Swelling behavior in reactive sintering of Fe–Al mixtures / H.Z. Kang, C.T. Hu // Materials Chemistry and Physics. – 2004. – Vol 88. – P.264–272.
11. Gedevanishvili S. Processing of iron aluminides by pressureless sintering through Fe+Al elemental route / S. Gedevanishvili, S.C. Deevi // Materials Science and Engineering: A. – 2002. – Vol. 325. – P.163 – 176.
12. Salamon M. Interdiffusion, Kirkendall effect, and Al self-diffusion in iron–aluminium alloys / M. Salamon, H. Mehrer // Zeitschrift für Metallkunde. – 2005. – Bd. 96. – N. 1. – P.4-16.
13. Laptiev A. Microstructure and mechanical properties of WC-40Co composite obtained by impact sintering in solid state / A. Laptiev, Z. Pakiela, O. Tolochyn, T. Brynk // Journal of Alloys and Compounds. – 2016. – Vol. 687. – P.135 – 142.
14. Laptev A.V. Structure and Properties of Ni3Al Intermetallic Under Vacuum Impact Sintering / A. V. Laptev, A. I. Tolochin, M. S. Kovalchenko, Ya. I. Evich, I. Yu. Okun // Powder Metallurgy and Metal Ceramics. – 2016. – Vol. 54. – P.554 – 567
15. Баглюк Г.А. Вплив технологічних режимів гарячого штампування на структуру та властивості порошкових інтерметалідів Fe3Al / Г. А. Баглюк, О. І. Толочин, О. В. Толочина, Р. В Яковенко // Вісник національного технічного університету «ХПІ». Серія: Інноваційні технології та обладнання обробки матеріалів у машинобудуванні та металургії. – 2014. – № 44 (1087). – С. 8-15.
16. Baglyuk G.A. Effect of Process Conditions on the Structure and Properties of the Hot- Forged Fe3Al Intermetallic Alloy / G. A. Baglyuk, A. I. Tolochin, A. V. Tolochina, R. V. Yakovenko, A. N. Gripachevckii, M. E. Golovkova // Powder Metallurgy and Metal Ceramics. – 2016. – Vol. 55. – P.297 – 305.
17. Баглюк Г.А. Влияние диборида титана на структуру и свойства горячештампованного интерметаллида Fe3Al / Г.А. Баглюк, А.В. Толочина, А.И. Толочин, Р.В. Яковенко, В.К. Кудь, М.Е. Головкова, Я.И. Евич, А.Н. Грипачевский // Міжвузівський збірник «Наукові нотатки», Луцьк. – 2015. – Випуск №50. – С. 8-17.
18. Jia C. Fe3Al based alloys fabricated by spark plasma sintering from mechanically activated powders / C. Jia, Q. He, J. Meng // Materials Science Forum – 2007. – Vols. 539–543. – P. 2706–2712.
19. Torun O. Friction welding of cast Fe-28Al alloy / O. Torun, I. Celikyürek, B. Baksan // Intermetallics.– 2011. – Vol. 19. – P. 1076–1079.
20. Subramanian R. Iron aluminide–Al2O3 composites by in situ displacement reactions: processing and mechanical properties / R. Subramanian, C.G. McKamey, J.H. Schneibel, L.R. Buck, P.A. Menchhofer // Materials Science and Engineering A. – 1998. – Vol. 254. – P. 119- 128.
- PDF (Русский)
Published
2016-12-31
How to Cite
Tolochyna, A. V., Mamonova, A. A., Okun, Y. I., & Evych, I. Y. (2016, December 31). PRODUCTION OF Fe3Al INTERMETALLIDE BY POROUS METALLURGY METHODS. Ceramics: Science and Life, (4(33), 28-38. https://doi.org/10.26909/csl.4.2016.3
Issue
Section
Technologies
License
CC License Attribution 4.0 International (CC BY 4.0) 