Computer calculation of the mineralogical composition of raw materials


  • L.P. Chernyak National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, av. Peremogy, 37, Bldg. 21, Kyiv, 03056, Ukraine http://orcid.org/0000-0001-8479-0545
  • A. Soroka Nulogx Inc., Toronto, Canada
Keywords:
mineral astringent, scope, mixture raw material, composition, burning.

Abstract

The possibility of making of mineral astringent material of the low temperature «Mineral» computer program to determine the quantitative content of rock-forming minerals of silicate raw materials as factor in structure formation in technological processes of production and to achieve the specified properties of materials and products are shown. The results of calculations of the mineralogical composition of carbonate and clay raw materials are presented.

Varieties of raw materials used in the chemical technology of silicates are a set of certain rock-forming minerals of known chemical composition. Determination of the quantitative content of rock-forming minerals of raw materials is possible by calculations based on the initial data of chemical and qualitative mineralogical compositions.

The creation of a mathematical apparatus for processing the results of research and computer technology has increased the efficiency and efficiency of determining the quantitative content of rock-forming minerals. However, the constant increase in the number of varieties of potential raw materials makes it appropriate to improve the method of determining the quantitative mineralogical composition using computer calculations and modern software, in the direction of which the work is performed.

Determining the quantitative mineralogical composition of raw materials using the computer program "Mineral" is appropriate to optimize the charge composition of masses and technological parameters of silicate production, including ceramics, glass and binders.

The created program "Mineral" should be used by specialists of the building materials industry, production, research and design organizations working in the field of chemical technology of silicates, teachers and students of higher educational institutions.

References

1. Комплексное развитие сырьевой базы промышленности строительных материалов Удачкин И.Б., Пащенко А.А., Черняк Л.П., Захарченко П.В., Семидидько А.С., Мясникова Е.А. К.: Будівельник, 1988. 104 с.

2. W E Worrall. Ceramic Raw Materials, 2nd Edition. Pergamon Press,1982. 116 p.

3. Christopher W. Sinton. Raw Materials for Glass and Ceramics: Sources, Processes, and Quality Control, 1st Edition. Wiley, 2006. 368 p.

4. D. Đukić, D. Lazić, D. Drljača, M. Imamović Characterization of raw materials and final product in the cement production. Bulletin of the Chemists and Technologists of Bosnia and Herzegovina, 2018. № 51. Р. 47 – 52.

5. Ничипоренко С.П., Круглицкий Н.Н., Панасевич А.А., Хилько В.В. Физико-химическая механика дисперсных минералов / под общ. ред. С.П. Ничипоренко. Киев: Наукова думка, 1974. 246 с.

6. Черняк Л.П., Гонтмахер В.Е. Минералогический состав и спекание глинистых систем. Стекло и керамика. 1980. № 5. С. 22 – 23.

7. R. Géber et al., Optimization of the Mixing Ratio of Two Different Clays Used for Ceramic Roof Tiles. Materials Science Forum, 2010. Vol. 659. Р. 477 - 482.

8. Черняк Л.П. Мінералогічний склад і напрямки застосування глинистої сировини Зб. Матеріали V міжнародної науково-технічної конференції «Композиційні матеріали» Київ: НТУУ «КПІ». 2010. С. 30 - 33.

9. Быстриков А.С. К вопросу о количественном определении кварца на дифрактометре УРС-50И. Труды института НИИстройкерамика. 1963. вып. 21. С. 133 – 139.

10. Соколов В.Н. Количественный анализ микроструктуры горных пород по их изображениям в растровом электронном микроскопе. Соросовский образовательный журнал, 1997, № 8, С. 72 - 78.

11. S. Kaufhold, M. Hein, R. Dohrmann, K. Ufer Quantification of the mineralogical composition of clays using FTIR spectroscopy. Vibrational Spectroscopy, 2012. Vol. 59. Р. 29 - 39.

12. E. Zeelmaekers, M. Honty, A. Derkowski and others Qualitative and quantitative mineralogical composition of the Rupelian Boom Clay in Belgium. Clay Minerals, Journal of Fine Particle Science, 2015. Vol. 50. Is. 2. Р. 249 – 272.

13. ДСТУ Б В.2.7-60-97. Сировина глиниста для виробництва керамічних будівельних матеріалів. Класифікація. К.: Держкоммістобудування України,1997. 12 с.

14. Черняк Л.П., Нестеренко И.П., Сорока А.С. Определение мінералогического состава глинистого сырья с помощью ЭВМ. Стекло и керамика. 1979. № 3. С. 17 – 19.

15. Розен О.М., Аббсов А.А. Количественный минеральный состав осадочных пород: расчет по петрохимическим данным, анализ достоверности результатов (компьютерная программа MINLITH). Литология и полезные ископаемые, 2003. № 3. С. 299 - 312.

16. Роберт У. Себеста. Основные концепции языков программирования. Concepts of Programming Languages. Пер. с англ. 5-е изд. М.: Вильямс, 2001. 672 с.

17. Черпаков И.В. Основы программирования. Учебник и практикум М.: Изд-во Юрайт, 2016. 219 c.

18. David Thomas, Andrew Hunt. The Pragmatic Programmer. Addison-Wesley, 2019. 320 p.
Published
2020-07-12
How to Cite
Chernyak, L., & Soroka, A. (2020, July 12). Computer calculation of the mineralogical composition of raw materials. Ceramics: Science and Life, (2(47), 21-25. https://doi.org/10.26909/csl.2.2020.3